What are the precautions for wrought iron gate paint construction

What the wrought iron guardrail manufacturer wants to introduce to you today is - what are the precautions for the paint construction of the wrought iron gate?

1. Paints cannot be mixed

In the construction of wrought iron gate paint, paints of different types (chemical properties) cannot be mixed and prepared, and the same thinner should be used.

2. Proper viscosity

The paint applied on the wrought iron gate should be fully stirred evenly before use, and adjusted to a suitable viscosity (dilution).

Wrought iron guardrail manufacturers: What are the precautions for the paint construction of wrought iron gates?

3. The mixing ratio should be strict

Wrought iron guardrail manufacturers: What are the precautions for the paint construction of wrought iron gates?

The multi-component paint used must be mixed evenly according to the ratio specified in the instruction manual before use.

4. Paint should be filtered

If there are skins or coarse particles on the paint surface, filter measures should be taken to avoid uneven paint film after painting and block the spray gun.

5. Recoat after drying

It is not advisable to apply too thick each time, and then apply a second time after it is completely dry to prevent pinching (false drying) and wrinkling.