The problems that should be avoided when installing hot-dip galvanized guardrails

Nowadays, hot-dip galvanized fences produced by large-scale hot-dip galvanized fence manufacturers or small manufacturers have become hot-selling products, which are not only widely used on roads, but even family balconies are gradually using hot-dip galvanized fences. Hot-dip galvanized guardrail has the characteristics of strong beauty, in addition to safety, it is also guaranteed. When it comes to safety, in addition to quality, you must pay attention to errors in the installation process. Therefore, the requirements for installers are very high.Here are some things to avoid for the staff during the installation process:Due to the inappropriate overlap of the frame fan; the hot-dip galvanized guardrail can be adjusted by adjusting the hexagon socket screws on the outside under the bearing support and the hexagon socket screws on the side of the diagonal rod to achieve the purpose of correction.

2. The diagonal deviation of the frame fan is too large, far exceeding the allowable deviation, which is mainly due to the deviation caused by blanking or welding. In this case, the artificial adjustment effect is not large, and the guardrail needs to be cut and redone.

3. Hot-dip galvanized guardrail is that the mechanical properties of the hardware used cannot meet the requirements of the window, and the doors and windows are most likely to appear after using inferior hardware.

4. The window frame is tilted when the hot-dip galvanized guardrail is installed. The reason is that the verticality of the window is not checked by a wire drop or a ruler during installation. Such careless errors must be avoided.

The reason why hot-dip galvanized guardrails can be recognized by everyone is not only the guarantee of quality but also the guarantee of installation and after-sales. The greatest value of the product lies in the peace of mind for users.