Razor wire installed on the fence

       Yesterday, a customer in Inner Mongolia asked about how to prevent someone from climbing on the low wall of his factory. After understanding the situation, we recommended the installation of double-strand barbed wire and razor barbed wire. The difference between the two types of barbed wire is that one is an iron wire and the other is a sharp iron sheet similar to a blade, which is extremely harmful.

　　 In the process of designing and installing, we strongly recommend fixing with Y-shaped bracket, as shown in the following figure:

　　 In the course of use, the rope rope is usually installed on the top of the barbed wire fence to enhance protection. If it is used as a wall protection, the installation must be firm to prevent some external factors from falling.

　　Y-shaped support is welded with square tube, round tube or angle iron. The overall structure adopts the principle of triangle stabilization. The two top and bottom ends of the bracket will be pre-punched to facilitate the installation of iron wire to fix the barbed wire.

       There is another way to fix the barbed wire fence during installation, as shown in the figure below:

　　Using a straight column as a support is troublesome during installation. The rope must be fixed with a special clip to push it to form a horizontal circle. This connection has a simpler appearance.