Chain Link Fence Machine

As a category of wire mesh, chain link fence machine manufacturers are widely used in petrochemical, construction, and aquaculture industries. Such as building wall fixing, floor concrete reinforcement, heat preservation, heat insulation; power plant wrapping pipes, boiler heat preservation, antifreeze, residential protection, and landscaping protection. It can also be used for animal enclosures such as fish, chickens, ducks, and rabbits. The speed of upgrading and upgrading is accelerating. With the development of modern high-tech, the technological development and innovation of the world's construction machinery products are becoming more and more agile, the update cycle is getting shorter and shorter, the product group can be broadened, and the product series are getting better.

Chain link fence machine manufacturers do not wear the net well (1) Check whether the wire netting key on a positioning pin is pressed tightly, and the wire netting key can be adjusted. Check that the mesh is flat and uneven, first look at which wire is uneven, and then tighten the wire roller to eliminate it. (2) Check whether the clutch top spring of the roll net is loose, just tighten it. (3) Check whether the angle of the hook is well created, just adjust the hook iron plate of the wire cutter. (4) Check whether the pitch of the iron wire on the knife board is perpendicular to that of the wire threader, and adjust the rocker behind the platform to eliminate it. (5) Check whether the upper wire on the knife board (the iron wire on the hook) is in the center of the upper and lower wire of the threading machine, and the screw on the back of the wire barrel can be adjusted up and down. After adjustment, the positioning needle must also follow It can be eliminated by adjusting the output barrel up and down.

The raw material is bound to the woven mesh of galvanized wire. The zinc ingot should not be less than GB4701 zinc. The zinc layer is a continuous and smooth surface. The surface of the electroplated parts is not allowed to have downflow or slag, and the electroplated surface without leakage. For leaks and other defects, the hardness of the galvanized wire must be the same. Mechanical adjustment: Before starting up, check the motor system, pneumatic system, and mechanical parts regularly, and clean and lubricate the linear bearings of the mold. Train operators, master the use of computer-related computer, electrical equipment and machinery, and be familiar with operating procedures and safety matters. Untrained personnel are strictly prohibited from operating. During the commissioning and production process of the unit, all operators and maintenance personnel are required to wear necessary labor protection equipment, such as goggles and safety helmets.

Chain link fence machine manufacturer, as the name suggests, is a machine for weaving chain link fence. It can crochet low carbon steel wire, stainless steel wire, aluminum alloy wire, PVC wire, sprayed wire, etc., and crochet the chain link fence mesh. Uniform and smooth surface. It is not easy to be corroded, long life, simple weaving, beautiful and practical, etc. Chain link fence machines are called differently due to geographical differences. CNC chain link fence machine manufacturers can also be called diamond wire mesh machines, coal mine supporting wire mesh machines, anchor wire mesh machines, chain link fence machine product display machines, net weaving machines, etc. It is a wire mesh machine that crochets low carbon steel wire, stainless steel wire, aluminum alloy wire, PVC wire, and sprayed wire into chain link fence. In normal use, it can be divided into five categories, namely: pedal parking type manual broken wire chain link fence machine, semi-automatic CNC chain link fence machine, automatic single wire chain link fence machine, automatic double wire chain link fence machine, PLC touch screen chain link fence machine.

Advantages of chain link fence machine manufacturers: 1. The working medium of the pneumatic transmission is air, which is easy to discharge, does not pollute the environment, and is economical; 2. The viscosity of the air is small, which is convenient for long-distance transportation and has low energy loss; 3. The pneumatic transmission responds quickly , Simple maintenance, no media maintenance and replenishment problems, easy installation; 4. Convenient energy storage, can be used to obtain air pressure energy from the gas cylinder; 5. Good adaptability to the working environment, allowing a wide range of working temperature. Numerical control chain link fence machine manufacturers have a wide range of uses and advantages, raising chickens, ducks, geese, rabbits and zoo fences. Protection of mechanical equipment, highway guardrail, stadium fence, road green belt protection net. After the wire mesh is made into a box-shaped container, the cage is filled with rubbish, which can be used to protect and support seawalls, hillsides, roads and bridges, reservoirs and other civil engineering. It is a good material for flood control and flood resistance. It can also be used in the manufacture of handicrafts and conveyor nets for mechanical equipment.